Most of laminated glass mass flow meters belong to fiberglass products. The key measuring parts are fiberglass products, and laminated glass is fragile. How to transport and store them correctly to prevent damage to glass tubes has become an important problem. In order to ensure the safety of the instrument and its staff, it is necessary to find a relatively stable area to place the flowmeter, so that it can be used comfortably.

When the flowmeter is installed on the pipeline for application, it is required to strictly follow the operation guide of the flowmeter, establish that the pressure and temperature conform to the setting regulations of the flowmeter, so as to avoid too large or too small working pressure, resulting in the measurement prohibition and the damage of the flowmeter. If the working pressure is too high, it will cause the glass tube to crack or the float to be stuck, and it can not be moved easily. During the installation, care should be taken to maintain the instruments and equipment as much as possible, and wear the professional anti cutting gloves liquid flowmeter to prevent the staff from being scratched by the fiberglass products.

When applying, operators should first read the article instructions in detail. Open the open channel flowmeter slowly when opening the gate valve. If the estimated total flow can fluctuate the motor rotor and the motor rotor does not move upward! Stop opening the valve again at this moment, and tap the pipeline gently! Make the motor rotor gradually rise. There are many actual operators who open the valve too hard! Just installed the machine! The sudden opening of the valve caused damage to the glass tube in the laminated glass rotameter. This should be noticed by users

Some operators like to remove the front cover, which is not allowed. Because the glass tube is easy to be blasted, the cover has maintenance effect. Therefore, the cover can not be removed from the application.

After the application of the flowmeter, for the laminated glass rotameter that is not used temporarily, it is also necessary to find a suitable natural environment to protect it from damage, maintain the cleaning of the flowmeter and the details of its parts, and have a technical and professional site and utensils to place the flowmeter that is not needed temporarily, so as to prevent frequent moving parts. Because the glass tube of the flowmeter is equipped with stainless steel plate floating Son, often move to cause the float to the glass tube collision, very easy to cause human factors damage.