Cologne flowmeter is used for industrial production flow measurement, and the key is to deal with the flow measurement of low viscosity and low Reynolds number hydrodynamics. It has successively experienced two major development trend links: pneumatic meter and electric meter. It is the target type flow in the original strain force built-in type (capacitance sensor) Based on the principle of measurement, a new type of force induction controller is selected as the measurement and more sensitive transmission components. In addition, a kind of intelligent electromagnetic flow meter dashboard is developed by using the large digital intelligent solution technology.

Product varieties and available industries:

Digital target flowmeter is a new type of magneto-mechanical target flowmeter, which is based on the measurement principle of traditional target flowmeter, flexibly uses the characteristics of * * *, integrates the new sensing technology and the modern electronic information technology research and development It not only has the characteristics of traditional target type, orifice plate, vortex street and other steam flow meters that can't move components, but also has the same measurement degree as the capacity type of steam flow meter, plus its unique anti-interference, anti residue characteristics, light and reliable characteristics, which are widely used in crude oil, chemical plant, power energy, food, environmental protection, water conservancy engineering and other industries Industry. From the practical effect of its application, the elliptical gear flowmeter has extremely wide versatility.

It is applicable to all kinds of pipes: from Φ 6 to Φ 200b250m to larger:

Suitable for high and low temperature test materials: from - 196 ℃ to + 450 ℃

Applicable to high working pressure: from 0 to 42MPa (gauge pressure)

Technical characteristics

1. The whole instrument panel is of solid structure and can not move components. It is of plug-in structure and convenient for disassembly and assembly

2. A variety of anti-corrosion and high and low temperature test materials (such as Hastelloy, titanium, etc.) can be used;

3. The whole equipment can be made into a sealed type without dead angle (welding method), without any leakage point, and can withstand 42MPa high pressure;

4. The instrument panel is equipped with self-examination procedure flow, and the common fault conditions are clear at a glance;

5. The controller does not touch the tested substance, and there will be no damage to parts, so the application can be trusted;

6. The dry test calibration method can be selected locally, i.e. standard weight hanging method. Single key operation can be calibrated;

7. With a variety of installation methods to provide options, such as the selection of online plug-in, low installation costs;

8. Have integrated temperature and working pressure compensation, output quality or standard party immediately;

9. Optional small data signal extraction, discrete system adjustment, filter time selection;

10. It can measure the flow rate of steam and liquid under various working conditions of normal temperature, high temperature 500 ℃, ultra-low temperature - 200 ℃;

11. The precision of measurement and verification can reach 0.2%;

12. Good repeatability, generally 0.05% - 0.08%, rapid measurement;

13. The damage of working pressure is only 1 / 2 △ P up and down of standard orifice;

14. Anti interference, strong anti residue working ability;

15. The measuring range can be changed according to the specific need to remove and change the flow resistance piece (target piece);

16. The low-energy rechargeable battery can display information on the spot, read the measuring range directly on the line, and the display can additionally load the instantaneous and accumulated total flow and percentage bar chart;

17. It is easy to install, operate and maintain;

18. Various output modes can transmit various main parameters remotely;

19. It has strong vibration resistance and can measure the pulsating beverage flow in a certain range.