The principle of single cutting beam force sensing technology is selected for the overall target steam flowmeter. What are the application characteristics of target flowmeter? The following is a brief analysis.

    Strong structure, no moving components, long service life, small damage to work pressure, low operation cost.

    2. A variety of anticorrosive and high and low temperature resistant materials (such as Hastelloy, titanium, etc.) can be selected.

    3. Automatic detection is set in the instrument, and the fault problems are clear.

    4. All equipment can be completely closed without dead angle (welding method), leakage point, and can bear 42MPa high pressure.

    5. The flowmeter sensor does not contact with the measured medium, and there is no wear of parts, so it is safe and reliable to use.

    6. Dry calibration method can be used locally, i.e. weight hanging method. One key operation completes the calibration.

    7. With integrated temperature and pressure compensation, direct output quality or standard.

    8. There are a variety of installation options, such as online insertion selection, low installation cost.

    9. With optional small signal removal, nonlinear correction, filtering time can be selected.

    10. It can accurately measure the gas and liquid flow under various normal temperature, high temperature 500 ℃ and low temperature - 200 ℃.

    11. The measurement accuracy is high, reaching 1.0%; the repeatability is good, generally 0.05% to 0.08%, and the measurement is fast.

    12. The pressure loss is only about 1 / 2 △ P of the standard orifice.

    13. Anti interference, anti impurity ability is very strong.

    14. The target plate can be replaced according to the actual needs (i.e. the force area can be changed) and the measuring range can be changed.

    15. For the measurement of liquid and vapor, the mixed medium and multiphase flow medium can be measured at a certain level.

    The target flowmeter has no movable parts, high measurement degree, wide medium adaptability, and the characteristics of anti-seismic, anti-interference and anti impurity. In the measurement of high viscosity and low Reynolds number fluid, the effect is better.